The Clean Water Act requires the Environmental Protection Agency (EPA) to take chloride discharge into our water seriously. They have developed water quality standards to protect our water resources from high concentrations of chlorides and other salty parameters. And eventually, everyone will have to comply with these standards.
The states are beginning to regulate chloride and other parameters related to the salinity of our surface waters. In many cases, states are giving communities time to make progress toward salty parameter reduction in their wastewater discharge by issuing variances. But regulations are always changing and municipalities have to know how they’re required to comply—and if they’re not yet required, what they should think about when the regulations come.
High concentrations of chlorides are toxic to fish, invertebrates and some plant species. The chlorides are regulated by state pollution control offices through a number of parameters.
Sometimes, when treated wastewater is discharged from municipal or industrial facilities, it can elevate the salt levels in the receiving water. The salt levels rise due to a high concentration of chlorides, sulfates, salinity and dissolved minerals. Put simply, these are often called salty discharges. There are primarily two ways salty discharges can happen:
1. Salty parameters entering the plant – this is when sources of salty parameters contribute to the influent of a wastewater treatment plant. These sources can include things like:
2. Receiving water sensitivity – the sensitivity of the water receiving the discharge can also play a role in how salty the water is in the end. The water’s ability to naturally dilute the treatment plant effluent is based on its ability to dilute the plant effluent.
According to Kathy Crowson, SEH wastewater engineer, if a community has high chlorides and the wastewater plant discharges to a sensitive receiving water, it is likely they will be required to take steps to reduce the salty parameters.
“The approach taken by a community depends on where the chlorides are being generated.” Crowson says.
A three-part plan can help your community deal with and plan for mitigating salty discharge.
Impacted communities are often required by the state to monitor their wastewater discharge for salty parameters. This differs from state to state. In Minnesota, the Pollution Control Agency requires this for facilities that discharge to a receiving water sensitive to chlorides.
Through testing, monitoring and inspections, a community can determine if the chloride is coming from home water softeners, industries, storm water or other sources. Understanding where the chloride originates is important so you spend your efforts and resources on finding the most cost-effective solution.
Each community is unique in its salty parameter sources—so the solutions are tailored to each specific circumstance. There are several strategies for developing affordable solutions, including:
Related Content: To Salt or Not to Salt: That Might Not be The Question
Of course, not all of these solutions will work in every community. And, in many cases, they’re expensive. That’s why it’s important to explore funding options that may be available to your community. In many cases, compliance over the long-term may require plant upgrades. This makes it important to plan for these upgrades well in advance.
Heidi Peper, SEH funding expert, explains a few popular funding sources:
In addition to the more traditional funding programs, states are designing new funding programs to assist with compliance of our regulatory environment. For example, Minnesota has a fairly new program, the Point Source Implementation Grant (PSIG) program. The program provides grants to communities that can fund up to 80 percent of eligible project costs or $7 million (whichever is less) associated with meeting water quality based effluent limits. In Colorado, they have the Energy and Mineral Impact Assistance Fund Grant that can be used to address water and wastewater needs. However, the community must be in an area impacted by minerals and mineral fuels production.
Some of the more traditional federal programs available across the country:
U.S. Environmental Protection Agency (EPA)
Minnesota Public Facilities Authority
USDA Rural Development
U.S. Department of Housing & Urban Development (HUD)
National Rural Water Association
“There is funding available for many of these projects needing to meet chloride limits,” Peper says. “But it does require a comprehensive understanding of the funding sources, their priorities and the timing of the programs. It also helps to have an understanding of which sources can be leveraged with each other.”
Related Content: Looking for project funding?
Since each state is handling salty discharge differently, here’s what some of them are doing.
California: On the West Coast, they’re focusing on residential water softeners. Some cities have outright banned them. Others pre-soften water before it gets to the residents. And some cities are educating residents on the efficient use of softeners or promoting the use of high-efficiency models.
Colorado: Colorado is exploring policies regarding discharge salinity. Currently, there is policy in place for discharging into the Colorado River Basin, which drains the portion of the State West of the Continental Divide.
Iowa: Iowa is currently researching the best way to move forward. Right now, they have site specific standards for chloride, which is based on water hardness.
Indiana: Indiana operates similarly to Iowa. There are protective measures based on hardness and sulfates. Some cities in Indiana plan to use reverse osmosis when their water treatment plants need replacement.
Minnesota: The Minnesota Pollution Control Agency (MPCA) measures salty discharge in municipal treatment facilities and identifies and applies limits on those with too high of limits.
Wisconsin: Wisconsin is studying the best method for compliance. Cities can apply for variances to the chloride standard. Some cities are promoting efficient water softener use with their residents.
The Clean Water Act enables the EPA to protect our environment and our water. Discharging excess chlorides and other salty parameters have negative effects on the environment and the EPA is asking the states to develop guidelines for compliance. Every community has its own circumstances contributing to salty wastewater discharge. And there are just as many solutions you can apply. From short-term fixes to long-term solutions, the answer often lies in the funding, and how you secure it.
Kathy Crowson, PE, is a wastewater engineer dedicated to helping communities preserve and protect the resources they rely on every day. Contact Kathy
Heidi Peper is a sales director who understands that taking advantage of the right financing packages can help communities better tackle projects. Contact Heidi